Description
- 250 Bar rated pressure
- 90°C rated temperature
- 1/4″BSPF inlet
- 033 (1.1mm) nozzle – Lt green
- Brass body
- Ceramic nozzle
- Rubber protecting sheath
- Fixed pressure
- 50 Bar min pressure
TPL250 Turbo Nozzle – 033
TPL250 Turbo Nozzle – 033
- 250 Bar rated pressure
- 90°C rated temperature
- 1/4″BSPF inlet
- 033 (1.1mm) nozzle – Lt green
- Brass body
- Ceramic nozzle
- Rubber protecting sheath
- Fixed pressure
- 50 Bar min pressure
Compare
Related products
Marco UP14 Gear Pump
Enquire Now- 2 Bar max pressure
- 46 Lpm max flow
- 24 Volt DC, 20 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- Viton seals, BUNA O rings
- 60°C max fluid temperature
- 4m max suction
- 3/4"BSP female ports
- With 2x 20mm brass hose barbs
- Inline filter (NOT for flooded feed)
- Suitable for diesel
Quick ViewSand Blast Lance Extension Kit – 045
Enquire Now- 220 Bar rated pressure
- 1.50mm 045 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewSand Blast Lance Extension Kit – 02
Enquire Now- 220 Bar rated pressure
- 1.00mm 02 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewMarco UP14/P Gear Pump
Enquire Now- 2 Bar max pressure
- 46 Lpm max flow
- 24 Volt DC, 20 Amp fuse
- Nickel plated brass body
- Helicoidal PTFE gears
- Viton seals, BUNA O rings
- 40°C max fluid temperature
- 3m max suction
- 3/4"BSP female ports
- With 2x 20mm brass hose barbs
- Inline filter (NOT for flooded feed)
Quick ViewSand Blast Lance Extension Kit – 08
Enquire Now- 220 Bar rated pressure
- 2.00mm 08 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewMarco UP6/OIL Gear Pump
Enquire Now- 2 Bar max pressure
- 8 Lpm max flow
- 24 Volt DC, 7.5 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- BUNA seals & O rings
- 80°C max fluid temperature
- 1.5m max suction
- 3/8"BSP female ports
- With 2x 13mm brass hose barbs
Quick ViewTPL250 Turbo Nozzle – 045
Enquire Now- 250 Bar rated pressure
- 90°C rated temperature
- 1/4"BSPF inlet
- 045 (1.3mm) nozzle - Yellow
- Brass body
- Ceramic nozzle
- Rubber protecting sheath
- Fixed pressure
- 50 Bar min pressure
Quick ViewChemical Injector Kit
Enquire Now- 1-50 Lpm flow
- 10 Bar max pressure
- Dema constant presure injector
- ARS178 QR couplings
- Chemical hose & weighted filter
- Suitable for use with SW2010 Spray Wash Unit
Quick ViewTPL250 Turbo Nozzle – 028
Enquire Now- 250 Bar rated pressure
- 90°C rated temperature
- 1/4"BSPF inlet
- 028 (1.0mm) nozzle - Lilac
- Brass body
- Ceramic nozzle
- Rubber protecting sheath
- Fixed pressure
- 50 Bar min pressure
Quick ViewMarco UP3/P Gear Pump
Enquire Now- 2 Bar max pressure
- 15 Lpm max flow
- 12 Volt DC, 10 Amp fuse
- Nickel plated brass body
- Helicoidal PTFE gears
- Viton seals, BUNA O rings
- 40°C max fluid temperature
- 1.5m max suction
- 3/8"BSP female ports
- With 2x 13mm brass hose barbs
- Inline filter (NOT for flooded feed)
Quick ViewSand Blast Lance Extension Kit – 05
Enquire Now- 220 Bar rated pressure
- 1.60mm 05 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewMarco UP6 Gear Pump
Enquire Now- 2 Bar max pressure
- 26 Lpm max flow
- 24 Volt DC, 7.5 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- Viton seals, BUNA O rings
- 60°C max fluid temperature
- 1.5m max suction
- 1/2"BSP female ports
- With 2x 16mm hose barbs
- Inline filter (NOT for flooded feed)
- Suitable for diesel
Quick View
