Description
- 220 Bar rated pressure
- 1.20mm 03 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension – M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Sand Blast Lance Extension Kit – 03
Sand Blast Lance Extension Kit – 03
- 220 Bar rated pressure
- 1.20mm 03 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension – M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Compare
Related products
TPL250 Turbo Nozzle – 045
Enquire Now- 250 Bar rated pressure
- 90°C rated temperature
- 1/4"BSPF inlet
- 045 (1.3mm) nozzle - Yellow
- Brass body
- Ceramic nozzle
- Rubber protecting sheath
- Fixed pressure
- 50 Bar min pressure
Quick ViewSand Blast Lance Extension Kit – 045
Enquire Now- 220 Bar rated pressure
- 1.50mm 045 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewMarco UP14/P Gear Pump
Enquire Now- 2 Bar max pressure
- 46 Lpm max flow
- 12 Volt DC, 30 Amp fuse
- Nickel plated brass body
- Helicoidal PTFE gears
- Viton seals, BUNA O rings
- 40°C max fluid temperature
- 3m max suction
- 3/4"BSP female ports
- With 2x 20mm brass hose barbs
- Inline filter (NOT for flooded feed)
Quick ViewMarco UP6 Gear Pump
Enquire Now- 2 Bar max pressure
- 26 Lpm max flow
- 24 Volt DC, 7.5 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- Viton seals, BUNA O rings
- 60°C max fluid temperature
- 1.5m max suction
- 1/2"BSP female ports
- With 2x 16mm hose barbs
- Inline filter (NOT for flooded feed)
- Suitable for diesel
Quick ViewChemical Injector Kit
Enquire Now- 1-50 Lpm flow
- 10 Bar max pressure
- Dema constant presure injector
- ARS178 QR couplings
- Chemical hose & weighted filter
- Suitable for use with SW2010 Spray Wash Unit
Quick ViewMarco UP6/P Gear Pump
Enquire Now- 2 Bar max pressure
- 26 Lpm max flow
- 12 Volt DC, 7.5 Amp fuse
- Nickel plated brass body
- Helicoidal PTFE gears
- Viton seals, BUNA O rings
- 40°C max fluid temperature
- 1.5m max suction
- 1/2"BSP female ports
- With 2x 16mm brass hose barbs
- Inline filter (NOT for flooded feed)
Quick ViewTPL250 Turbo Nozzle – 033
Enquire Now- 250 Bar rated pressure
- 90°C rated temperature
- 1/4"BSPF inlet
- 033 (1.1mm) nozzle - Lt green
- Brass body
- Ceramic nozzle
- Rubber protecting sheath
- Fixed pressure
- 50 Bar min pressure
Quick ViewMarco UP3/P Gear Pump
Enquire Now- 2 Bar max pressure
- 15 Lpm max flow
- 12 Volt DC, 10 Amp fuse
- Nickel plated brass body
- Helicoidal PTFE gears
- Viton seals, BUNA O rings
- 40°C max fluid temperature
- 1.5m max suction
- 3/8"BSP female ports
- With 2x 13mm brass hose barbs
- Inline filter (NOT for flooded feed)
Quick ViewSand Blast Lance Extension Kit – 06
Enquire Now- 220 Bar rated pressure
- 1.70mm 06 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewSand Blast Lance Extension Kit – 035
Enquire Now- 220 Bar rated pressure
- 1.30mm 035 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick ViewMarco UP6 Gear Pump
Enquire Now- 2 Bar max pressure
- 26 Lpm max flow
- 12 Volt DC, 15 Amp fuse
- Nickel plated brass body
- Helicoidal bronze gears
- Viton seals, BUNA O rings
- 60°C max fluid temperature
- 1.5m max suction
- 3/8"BSP female ports
- With 2x 16mm brass hose barbs
- Inline filter (NOT for flooded feed)
- Suitable for diesel
Quick ViewSand Blast Lance Extension Kit – 02
Enquire Now- 220 Bar rated pressure
- 1.00mm 02 nozzle
- TS33 sand blast head
- 500mm probe
- 400mm lance extension - M22 M inlet
- 4m reinforced PVC hose
- For use with kiln dried sand
Quick View
